Brand New CD-41 Adapter for Yaesu SBR-14Li VX-8R VX-8DR VX-8GR FT-1DR FT-2DR

How to Select the correct YAESU CD-41 Radio Adapter
Before purchasing YAESU CD-41 Radio you need to make sure make the replacement for CD-41 Adapters will give you the correct voltage,suitable current output and the right "tips". Most Radio users travel, for tdose travel to Australia, Europe or US they require Radio adapters that take 100-240 voltage input and output 16 voltage or 19 voltage.
You should Follow 2 easy steps to pick the right Radio adapters.
1. Finding the right "output voltage" and "current output"
To find out the voltage & current, turn your Radio over and look for a label, sticker or writing which shows the voltage and current.You can also find these shown on your original YAESU AC Adapter CD-41 if you have it.
voltage [volts V]- it has to be the same as voltage value specified on your Radio.Different Radio were designed to consume power varied by equipments such as CD-Rom, LCD size, CPU maker and CPU speed. You require to use the "matching voltage" . Only use the Replacement For YAESU CD-41 Charger output the matching voltage of your Radio. You can easily locate your Radio voltage. Mostly, voltage is printed on your Radio. You also can check your Radio manual.
Current output[ampere A] -it has to be the same or higher than the value specified on your Radio.The Amps may be higher but they cannot by lower. If you are purchasing a universal YAESU CD-41 Radio Adapter or Car Charger you will need to work out the Watts of your original YAESU CD-41 Radio adapter and select the universal YAESU CD-41 Adapter or Car Charger with the same Watts or next highest Wattage. You can work out the Wattage by multiplying the Voltage by the Amps i.e 16V X 4A = 64 Watts. There is no 64 Watt YAESU CD-41 AC Adapter so you will need to select the next step up which is the 70 Watt or higher Watt YAESU CD-41 Power Adapter.(NOTE: If the wattage requirement for your Radio is lower than the 64W of the adapter, it will not damage your Radio, your Radio will only take the amount of power it requires. I.E. If your Radio needs 50W, then either the 60W or 90W will work OK. If your Radio needs 80W then you will need the 90W one as the 75W one will not be powerful enough.)
2. Finding the right "tips"
Different Radios have different connectors. You need the right tip for your Radio. This is very simply to find. Basically, laptop AC adapters comprise of 2 ends. One end is male power outlet. You use this end to plug into wall power outlet. The other end is called "TIP" which you will plug this tip into the "DC IN" in your Radio.
Your Radio won't work on the wrong tip. You can only use the " matching Tips"
Warning : DO NOT try to force it in.