Brand New H536T Adapter for 90W CAR/AIR Charger Dell Alienware M11x,M11x R2,M11x R3 PC

How to Select the correct Dell H536T Cable/Line Adapter
Before purchasing Dell H536T Cable/Line you need to make sure make the replacement for H536T Adapters will give you the correct voltage,suitable current output and the right "tips". Most Cable/Line users travel, for tdose travel to Australia, Europe or US they require Cable/Line adapters that take 100-240 voltage input and output 16 voltage or 19 voltage.
You should Follow 2 easy steps to pick the right Cable/Line adapters.
1. Finding the right "output voltage" and "current output"
To find out the voltage & current, turn your Cable/Line over and look for a label, sticker or writing which shows the voltage and current.You can also find these shown on your original Dell AC Adapter H536T if you have it.
voltage [volts V]- it has to be the same as voltage value specified on your Cable/Line.Different Cable/Line were designed to consume power varied by equipments such as CD-Rom, LCD size, CPU maker and CPU speed. You require to use the "matching voltage" . Only use the Replacement For Dell H536T Charger output the matching voltage of your Cable/Line. You can easily locate your Cable/Line voltage. Mostly, voltage is printed on your Cable/Line. You also can check your Cable/Line manual.
Current output[ampere A] -it has to be the same or higher than the value specified on your Cable/Line.The Amps may be higher but they cannot by lower. If you are purchasing a universal Dell H536T Cable/Line Adapter or Car Charger you will need to work out the Watts of your original Dell H536T Cable/Line adapter and select the universal Dell H536T Adapter or Car Charger with the same Watts or next highest Wattage. You can work out the Wattage by multiplying the Voltage by the Amps i.e 16V X 4A = 64 Watts. There is no 64 Watt Dell H536T AC Adapter so you will need to select the next step up which is the 70 Watt or higher Watt Dell H536T Power Adapter.(NOTE: If the wattage requirement for your Cable/Line is lower than the 64W of the adapter, it will not damage your Cable/Line, your Cable/Line will only take the amount of power it requires. I.E. If your Cable/Line needs 50W, then either the 60W or 90W will work OK. If your Cable/Line needs 80W then you will need the 90W one as the 75W one will not be powerful enough.)
2. Finding the right "tips"
Different Cable/Lines have different connectors. You need the right tip for your Cable/Line. This is very simply to find. Basically, laptop AC adapters comprise of 2 ends. One end is male power outlet. You use this end to plug into wall power outlet. The other end is called "TIP" which you will plug this tip into the "DC IN" in your Cable/Line.
Your Cable/Line won't work on the wrong tip. You can only use the " matching Tips"
Warning : DO NOT try to force it in.